When we are installing outdoor led display screens, if the installation is improper, water leakage is likely to occur. So how do we install it to avoid water leakage in the equipment?
This requires everyone to pay attention to the following points:
1.Add backplane and sealant: Some friends are very afraid of trouble. In order to save trouble, they don’t add backplane or backplane without sealant when installing the led display screen. Do you know that, once the time passes, the electronic components will inevitably enter water, and the display will have problems after many years.
2.Leakage port: If the display screen and the back panel are closely integrated, then the water leakage port must be tapped under it. The so-called water leak, to understand it in a simpler way, is used to leak water. To be honest, no matter how closely the front and back of the led display are combined, there is still more or less water in the environment under the years and months. If there is no leakage hole in the lower mouth, the water will inevitably accumulate more and more under the long-term accumulation. If the leakage hole is punched, the water will flow away, which will inevitably play a very obvious waterproof effect.
3.Appropriate wiring: What we need to remember is that when installing the led display, strictly speaking, the plug wiring must use the appropriate wire. Under normal circumstances, it generally obeys the principle of bigger than smaller. In other words, to put it simply, calculate the total wattage of the led display screen and choose a slightly larger wire, which can reduce the probability of causing the circuit to burn out.